FJB80
Automatic high speed blow molding machine
MODE: Series of FJB80
Video: http://v.youku.com/v_show/id_XMjYyNzIzODIw.html
Screw Diameter (MM) | Distance of mold platen (MM) | Plasticizing Capacity(KG/H) | Clamping force (KN) | Average consumption(KW/H) |
80 | 200-560 | 100 | 115 | 20 |
BASIC INSTALLATION INCLUDING
● Die head: According to customers' products
● Extrusion system: Adopt world-famous brand automatic temperature controlling device. Drive the screw with transducer and motor reducer to realize stepless regulating.
● Clamping device: Adopt bi-directional synchronous clamping device with double axis single cylinder to stabilize equipment well
● Blowing device: with upper blowing type
● Hydraulic system: Use double-vane pump. The whole hydraulic system adopts world-famous bran
controlling components and proportional controlling circle.
● Electric controlling system: Adopt programmable controller made in Japan. Every electric component is of world-famous brand.
Item | Value | Unit | |
General information | Max. product volume | 12 | L |
Productivity(unload circulation) | 1550 | PC/h | |
Screw Dia. | φ80 | mm | |
Screw Length/Dia. Ratio | 24 | L/D | |
Extruder system | Plasticising capacity(HDPE) | 100 | Kg/h |
Extrusion Power | 30 | Kw | |
Heating Zones of Barrel | 3 | ZONES | |
Lifting stroke of extruder surface | 200 | mm | |
Clamping system | Clamping force | 115 | KN |
Mold Platen | 520x400 | mm | |
Max. mold(W×H) | 520×390 | mm | |
Mold thickness | 80-160 | mm | |
Distance of mold platen | 200-560 | mm | |
Stroke of mold platen | 360 | mm | |
Double die heads | Max. Die dia. | φ220 | mm |
Heating Power of Die Head | 10 | Kw | |
Heating zone | 3 | Zones | |
Center distance | 250 | mm | |
Center distance of three die heads | 160 | mm | |
Center distance of four die heads | 110 | mm | |
Machine parameters | Machine Size(L×W×H) | 3.3×2.2×3.0 | m |
Machine Weight | 7-8 | T | |
Blowing unit | Up-down stroke of blowing head | 150 | mm |
Rack | Up-down stroke | 130 | mm |
Hydraulic system | Rated pressure of big pump | 5 | Mpa |
Rated pressure of small pump | 10 | Mpa | |
Rated flow of big pump | 94 | L / min. | |
Rated flow of small pump | 28 | L / min. | |
Motor power of hydraulic pump | 15 | KW | |
Pneumatic system | pressure of air supply | 0.7 | |
Working pressure | 0.6 | Mpa | |
Air consumption | 0.6 | M3 / min. | |
Water supply | Pressure of water supply | 0.3 | MPa |
Water flow | 0.4 | m3 /min | |
Power supply | Voltage | AC380V±10% | |
Frequency | 50 | HZ | |
Connect system | 3 phase 4 wires | ||
total rated power (reference) | 35 | KW/H | |
Average consumption (reference) | 20 | KW/H |
Get our perfect solution for blow modding
Contact
