Auto loader

Feature:

1. The separation-type design is adopted for machine to be convenient for installation. The machine body is placed on the ground to be convenient for operation, filter washing or curing.

2. The electromotor is adopted with three-phase high hydrostatic induction type, with greater conveying capability and longer service life, the wrong on carbon brush replacement is exempted.

3. The storage bucked is adopted with stainless steel material so as to ensure that the raw materials are not polluted, and the service life is prolonged.

4. The original products imported from Taiwan are adopted for micro-computer full function controller so as to ensure that the performance is more stable and the service life is longer.

5. The adjustable automatic back-flushing dedusting device is attached so as to ensure that the filter is not plugged to prolong the clearing period.

6. The full feed indication and the electromotor overloading protection device on feed lacking alarm are attached to be convenient for operation control and troubleshooting.

7. Washable filter made from special material for repeatable usage.

Send Inquiry

Product Description

JL2 Auto loader technical parameters
Model	JL220	JL230	JL245	JL260	JL280	JL2100	JL2150	JL2200
Inner conveying（kg/h）	200	450	450	600	800	100	1500	2000
Cas pump power（kw）	0.75	1.5	1.5	2.2	3.0	4.0	5.5	7.5
Inner diameter of air suction pipe（mm）	ɸ38	ɸ50	ɸ50	ɸ50	ɸ63	ɸ63	ɸ63	ɸ76
Inner diameter of feed suction pipe（mm）	ɸ38	ɸ38	ɸ38	ɸ50	ɸ50	ɸ50	ɸ63	ɸ63
Volume of charging bucket（L）	8	12	12	15	20	40	40	40
Total height of charging barrel（mm）	400	480	480	520	550	650	650	650
Length of charging main machine（mm）	430	430	430	430	430	600	600	600
Width of charging main machine（mm）	500	500	500	500	500	800	800	800
Width of charging main machine（mm）	1100	1100	1100	1100	1100	1150	1150	1150
Safety Protection	1. The full feed indication, alarm on feed lacking and electromotor, overloading protection device are provided to be convenient for operation and trouble shooting. 2. The original micro-computer full function controller imported from Taiwan is adopted so as to ensure that performance is more stable and the service life is longer.
Instruction on Model Selection	1. High-temperature flexible pipe must be provided when the temperature of the raw material conveyed reaches over 60℃ 2. The dust collector for charging must be selected and matched when there are more crushed recycling material in the conveyed raw material. 3. The conveying capacity is measured by PE new arranges on 3.5m height and 2.5m length.

Get our perfect solution for blow modding

Rainy Chang: +86-15051710197 Alice Huang: +86-18606242720 David Jiang: +86-13915688471 Cancel

Rainy Chang: [email protected]Alice Huang: [email protected]David Jiang: [email protected] Cancel

Auto loader

Get our perfect solution for blow modding

Contact